![]() |
|
|
|
|
#1
|
|||
|
|||
|
Parts still FS - Holset, HKS, stock
[pending]Holset HX35 w/ stock Holset housing, 3" v-band exhaust outlet welded on, needs a rebuild - pic 1, pic 2 - $75 + shipping
[sold]HKS 272 cams - pic 1, pic 2 - $350 shipped [pending]PTE 880s - pic - $150 shipped OBO [sold]Greddy Type-RS BOV - pic - $80 shipped Greddy Type-S BOV, may need a new spring, top re-tapped with bolt for adjustment - pic - $30 shipped Walbro 190lph pump, approximately 30k on it - pic - $30 shipped [sold]RRE 6-bolt FWD aluminum flywheel, has some gouges from a spring coming loose with an ACT clutch - pic 1 - $50 shipped [sold]Defi D-gauge black(matches stock gauges) 40psi boost gauge - $50 shipped 2gB projector headlights, shiny black inside, could use a buffing and will need to be re-wired if you want high beams - $50 Some stock parts: (2) coil packs - pic - $30 each Set of revised lifters, 1 is a 1g lifter due to one revised lifter being DOA - pic - $20 2g TPS - pic - $10 shipped 2gA reverse lights, nearly new - pic - $15 shipped 1gB Talon complete taillight set - pic $shipping + $20 PM for phone number, PayPal, or questions. Thanks for looking, Shannon
__________________
![]() 95 GST - gone ![]() 02 Jeep Liberty Sport 4x4 - DD/off-road toy, 2.5" lift and 31" MTRs Last edited by Spidey : 1 Week Ago at 02:54 PM. |
|
#2
|
|||
|
|||
|
Bump, everything still for sale!
|
|
#3
|
|||
|
|||
|
what kind of shape is the hx35 in. Just blown seals/bearings or total annihilation of the fan blades and such?
__________________
96 TSi awd- getting a new motor 95 gs-t - i/e, greddy bov 90 300zxtt 91 240sx - ka-t, t3/t4 @ 12psi 05 SRT4- i/e, 65shot... |
|
#4
|
|||
|
|||
|
Does the Type RS sound anything like the old Type S ? man, I've been through like 3 type S's and my type RZ is as quiet as a 1g bov,. I may be game for the type RS.......let me know
__________________
98 talon fashion model 95 talon check writer 96 eclipse check casher ![]()
|
|
#5
|
|||
|
|||
|
TSickTalon - blown bearings and seals, the compressor wheel did rub the housing a tiny bit but the wheels are fine.
Paul - to be honest, I don't even remember what it sounded like, if you want to give it a try before you buy, you're welcome to. |
|
#6
|
|||
|
|||
|
Shannon you still got the holset for sale? Shoot me a text bro 864-345-0736 Ill take it off your hands.
__________________
1995 GSX 2gb conversion, 17c, 38mm wg, DSMlink 2.5, MSD DIS-2, AFI 1600's 2.0 w/ 9.0:1 .20 Wiseco’s, Eagle H-Beams, ARP everything, ACL Tri-metals, Crower springs and retainers, FP4r cams, Fadanza cam gears, Magnus SMIM, 1mm over valves, Supertech bronze valve guides, 3g lifters, Cometic HG, 1g NT TB, SSAC FMIC, 2 1g bov w/ DG mod, FP 4” Intake, AEM wideband, Walbro255, Aero ARPR, -6 SS fuel line, Stock trans (Fresh rebuild) w/ ACT 2600 PP, Clutchnet 6-Puck, ACT flywheel w/ ARP flywheel bolts |
|
#7
|
|||
|
|||
|
Bump!
|
|
#8
|
|||
|
|||
|
Still a few things for sale!
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
|
All times are GMT -4. The time now is 09:20 PM. |